JL Audio XD600/1v2

General Specifications

Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω 400 W RMS x 1
@ 3 Ω 500 W RMS x 1
@ 2 Ω 600 W RMS x 1
@ 1.5 Ω N/A

Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω 300 W RMS x 1
@ 3 Ω 400 W RMS x 1
@ 2 Ω 500 W RMS x 1
@ 1.5 Ω N/A

Frequency Response – 7 Hz – 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power – >87 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W – >67 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 Ω – >1000 / 50 Hz
Damping Factor @ 2 Ω – >500 / 50 Hz
THD+N @ Rated Power – <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs – Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge – 4 AWG wire
Fuse Rating – 50 A (AFS, AGU or MaxiFuse™)

Filter Mode(s) – Low-Pass only
Filter Slope(s) – 12/24 dB/octave
Filter Frequency Range – 50 Hz – 500 Hz
Detented, Calibrated Filter Freq. Potentiometer – Yes
Filter Defeat Function Yes
Infrasonic Filter – 30 Hz, defeatable
Bass Boost EQ – No
Output Polarity Switch – No
Remote Subwoofer Level Control – Optional (HD-RLC)
Remote Bass EQ Boost Control – No
Pass-Through Preamp Output – Buffered

Height (H) 2.05 in / 52 mm
Width (W) 8.52 in / 216 mm
Depth (D) 7.09 in / 180 mm
Net Weight 6.3 lb / 2.86 kg

Description

Monoblock Class D Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω – 14.4V

This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don’t let the small size fool you, though… this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).

Targeted specifically for subwoofer applications, the XD600/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz.

The XD600/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s level can be directly controlled from the driver’s seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.