JL Audio XD1000/1v2

$1,700.00

Specification:

  • Rated Continuous (RMS) Power @ 14.4 V
    @ 4 Ω 600 W RMS x 1
    @ 3 Ω 800 W RMS x 1
    @ 2 Ω 1000 W RMS x 1
  • Rated Continuous (RMS) Power @ 12.5 V
    @ 4 Ω 500 W RMS x 1
    @ 3 Ω 650 W RMS x 1
    @ 2 Ω 800 W RMS x 1
  • Frequency Response – 7 Hz – 500 Hz (+0, -1dB)
  • S/N Ratio, referred to highest rated power – >83 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W – >53 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω – >1000 / 50 Hz
  • Damping Factor @ 2 Ω – >500 / 50 Hz
  • THD+N @ Rated Power – <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs – Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
  • Min.Copper Power / Ground Wire Gauge – 4 AWG wire
  • Fuse Rating – 80 A (AFS, AGU or MaxiFuse™)
  • Filter Mode(s) – Low-Pass only
  • Filter Slope(s) – 12/24 dB/octave
  • Filter Frequency Range – 50 Hz – 500 Hz
  • Detented, Calibrated Filter Freq. Potentiometer – Yes
  • Filter Defeat Function – Yes
  • Infrasonic Filter – 30 Hz, defeatable
  • Bass Boost EQ – No
  • Output Polarity Switch – No
  • Remote Subwoofer Level Control – Optional (HD-RLC)
  • Remote Bass EQ Boost Control – No
  • Pass-Through Preamp Output – Buffered

Description

Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω – 14.4V

This potent monoblock subwoofer amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. The XD1000/1v2 is capable of delivering 1000 W of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.

Designed specifically for subwoofer applications, the XD1000/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). The XD1000/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s level can be directly controlled from the driver’s seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.