JL Audio VX800/8i

$3,600.00

Specification:

  • Rated Continuous (RMS) Power @ 14.4V
    @ 4 Ω 75 W RMS x 8
    @ 2 Ω 100 W RMS x 8
    Bridged @ 4Ω 200 W RMS x 4
  • Rated Continuous (RMS) Power @ 12.5 V
    @ 4 Ω 60 W RMS x 8
    @ 2 Ω 90 W RMS x 8
    Bridged @ 4Ω 180 W RMS x 4
  • Frequency Response – 12 Hz – 24 kHz (+0, -1dB)
  • S/N Ratio, referred to highest rated power (Analog Inputs) – 99 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W (Analog Inputs) – 80 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
  • S/N Ratio, referred to highest rated power (Digital Inputs) – 101 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth
  • S/N Ratio, referred to 1 W (Digital Inputs) – 82 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω – >100 / 50 Hz
  • Damping Factor @ 2 Ω – >50 / 50 Hz
  • THD+N @ Rated Power – <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs – 200 mV – 16 V RMS
  • Min.Copper Power / Ground Wire Gauge – 4 AWG wire
  • Fuse Rating – 80 A (AFS, AGU or MaxiFuse™)
Categories: , Tags: ,

Description

8-Channel Class D Full-Range Amplifier with Integrated DSP, 100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω – 14.4V

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.

With our second-generation NexD2™ technology, the VX800/8i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms to deliver a powerful 200 W x 4.

The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.

Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.

Amplifier includes: Power Connector (for 2 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harnesses (2), 6 ft A/B USB Cable

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products