BRAX Matrix ML10

$2,108.00

Model: Matrix ML10

Specification

Power RMS / max.   600 / 1200 Watts
Impedance  Z 4 Ω
DC resistance  Re 3.4 Ω
Resonance frequency  Fs 35 Hz
Mechanical Q factor  Qms 8.10
Electrical Q factor  Qes 0.49
Total Q factor Qts 0.46
Compliance Cms 241 µm/N
Equivalent air volume Vas 40 L
Force factor  B*I 11.60 Tm
Efficiency 1 W / 1 m SPL 87 dB
Cone area  Sd 346 cm²
Moving mass  Mms 89 g
Cone material   Paper cone with “Micro-Sphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
Mechanical resistance  Rms 2.37 kg/s
Voice coil diameter ø 65 mm / 2.6″
Voice coil winding height   33 mm / 1.3″
Max. linear excursion  Xmax +/- 12.5 mm
Outer diameter ø 275 mm / 10.8″
Installation diameter ø 235 mm / 9.3″
Installation depth   114 mm / 4.5″
  
Recommended enclosure volumes  
Sealed box 
Net volume   28 L
Lower limiting frequency (-3dB)   45 Hz

 

Description

BRAX MATRIX ML10

For years, our BRAX subwoofer have set the benchmark for precise and controlled bass response.

When you have already built the perfect speaker, building the next perfect speaker is an ambitious project, but not for BRAX. BRAX would not be BRAX if we were not able to identify every single detail that improves the sound quality through the use of ever advancing technologies. Perfection is subject to refinement and the human ability to learn.

In the case of the ML10, the secret lies in the unique cone or – to be more precise – in its entirely new “MicroSphere” coating. This patented technology embeds ceramic hollow spheres with a diameter of solely 75 µm in a polyamide layer that is applied to the cone. That special coating not only improves the stiffness of the hand-scooped cone, but its inner damping as well. These stabilizing measures do not necessarily have to result in an increased moving mass. In actuality, we have achieved the contrary to this – in comparison with its predecessor the cone mass has been reduced, which results in a lower total Q factor and therefore, even better impulse response.

The pure design and numerous technical features of this exceptional subwoofer are the things that make a legend. The perfectly linear magnet structure for lowest possible distortion, large and multiple ventilated voice-coil for outstanding electrical power handling as well as the rigid and aerodynamically efficient diecast basket add up to an unprecedented overall concept for the most accurate and uncompromising bass response.

Therefore, the new BRAX MATRIX ML10 is now more than ever, a must-have for every sound enthusiast who only settles for the best.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.